Flight 940 One hour and fifteen minutes. Clear skyStrong breeze above 50 ft, calm at the surface.
This is the first launch without A assists since the shoulder surgery 3 1/2 years ago. It came off ok but I need to move my shoulders back from the hang points. During the beginning of inflation my arms are pulled back to an unnatural position that could re damage the shoulder. It also effects normal flight but is only uncomfortable, not a danger. I'm wondering if the solution would be to change the hang point assembly to a power loop configuration similar to the trike buggy. The nice thing about the power loop was that I could have my arms behind the beaners. I'm afraid that major changes would have to be made to make it work. (Like removing the bar behind my head and reworking the cage bracing and cutting some square tubing and re bracing the hang point bar.
As to the change in the angle of the frame. Thrust is more horizontal, there is a significant improvement in climb rate. However, cruise RPM is only slightly lower. With such a difference in climb I would expect cruise would also be dramatically better. Go figure? The landings are different in that I burn off energy for a long way before touching down and when I do touch, the Rig is slow enough that there is barely any roll out. I noticed that toward the end I was putting tremendous pressure on the brakes before touching down. Prior to this, the back wheels would touch down and the rig would roll a good distance with the front wheel at chest level.
This is the first launch without A assists since the shoulder surgery 3 1/2 years ago. It came off ok but I need to move my shoulders back from the hang points. During the beginning of inflation my arms are pulled back to an unnatural position that could re damage the shoulder. It also effects normal flight but is only uncomfortable, not a danger. I'm wondering if the solution would be to change the hang point assembly to a power loop configuration similar to the trike buggy. The nice thing about the power loop was that I could have my arms behind the beaners. I'm afraid that major changes would have to be made to make it work. (Like removing the bar behind my head and reworking the cage bracing and cutting some square tubing and re bracing the hang point bar.
As to the change in the angle of the frame. Thrust is more horizontal, there is a significant improvement in climb rate. However, cruise RPM is only slightly lower. With such a difference in climb I would expect cruise would also be dramatically better. Go figure? The landings are different in that I burn off energy for a long way before touching down and when I do touch, the Rig is slow enough that there is barely any roll out. I noticed that toward the end I was putting tremendous pressure on the brakes before touching down. Prior to this, the back wheels would touch down and the rig would roll a good distance with the front wheel at chest level.
No comments:
Post a Comment