Search This Blog
Tuesday, June 21, 2016
The Big 900
Tuesday, November 10, 2015
Ten Years of flight #847
Friday, October 16, 2015
First Florida Cross Country 841
Friday, October 9, 2015
838 Placida at Dawn
Wednesday, August 28, 2013
680 Vance Brand 8500 feet
It is 13 miles away ... good cross country... someday.
Wednesday, June 26, 2013
649...650...651 Vance Brand
Three good flights and a touch and go ... ran out of gas
Thursday, July 14, 2011
#500
| Pilot Rainbow |
What Fun!
Sunday, April 4, 2010
Flying Easter Sunrise Service at Red Rocks
It was 27 degrees at 0600 hours. The skies were clear with no discernible breeze. I’d left the Falcon in the truck so it was just a matter of pulling on my cold weather gear and getting on the road. One of the best things about living with Chip is that Simms is only 5 minutes away. The field is looking better than it has in a couple of years. The heavy wet snows have packed the weeds down and other than a general bumpiness I’ve no complaints.
The first attempt was botched when the wing came up crooked. The breeze had picked up a bit and I missed the shift. When I set-up the second time I adjusted and took off without problem to the West. Looking at the wing I thought the brake lines looked wrong. One line (left inside) seemed unusually slack. I couldn’t see a problem and when I tried some input it reacted ok, but… it didn’t feel right so I turned back and landed by the truck. On the ground I still could not find a problem, so I re-set and launched. The air was good and did not feel as cold as I knew it was.
It was more comfortable with the seat positioned more upright but the brake lines are still too far aft. It pulls my arms back and stresses my shoulders. I’m not sure what the fix is…move the seat back… put some kind of line guide on the hang point rails. Maybe I just need to work on upper body strength. It’s better but there are still a few tweaks to get it right.
The Falcon was climbing great. At 3400 RPM I had 290 ft/min and when I adjust the prop a little more I’m sure that will improve. Considering that I was 300 RPM below optimum 375 ft/min should be attainable.
As I traversed Bear Creek Park it started to get bumpy. I had a clear view of Red Rocks, there were lots of cars in the parking lot but it didn’t look like a full house because the top 2/3rds of the seats were empty.
It looked like the wind was going to pick up, there was a bank of hard blown clouds to the North. Concerned that I would get into a wind storm or strong turbulence from the up slope meeting the down slope…I decided to turn back so that I would be over home field if I needed to get down in a hurry. It would have been nice to buzz the amphitheater but no sense pushing it.The landing was good; the wind had come up considerably with a gust that popped me up on final. Fortunately I had plenty of room and landed close to the truck.

This was a good thing to do. Getting ready yesterday and climbing out of bed before dawn occupied my mind giving me a little respite from the troubles that have been consuming my attention the past several months.
Wednesday, January 20, 2010
Colorado Falcon lands in Denver !




The rest of my universe is a total disaster but after months of waiting the Falcon has landed!
I can honestly say this was the first time I’ve smiled in 7 weeks. Pam the u-ship gal showed up an hour early and we unloaded in no time. Best of all she was able to take the Thumper back to Terry on her return trip. He will have it in the first days of Feb.
Quick observations
1. It has the best visibility of any of my previous trikes. I can see all points of the compass. For the first time I will be able to look back through the prop and it will be easy to check fuel level. It will be much easier to launch when I can see the wing inflate without using a mirror. It's going to be great to be able to look behind and see in all the traditional blind spots. I'm thinking that it will be closer to the foot launch experience. The bucket seat puts you “out there” so… instead of being cocooned inside of a harness or low down in the trike buggy… you’ve got your ”knees in the breeze”, as Brett Cam would say. The forward rail is narrower and the front wheel is out of view which also reduces the "visible stuff" out in front. I’m really looking forward to flying this thing!
2. The bucket seat was a good option, designed for go carts it is very suitable for the Falcon. It fits my small frame great and I think bug guys will like it too. The side rails make great attachment points for the reserve and if I want I can mount a "saddle bag" on the other side for cameras, water, mini parachutes... toys.
3. The electric start was smooth but there is no optional pull start like the Briggs & Stratton. It's not really an issue... since I never had to use the pull start on the Thumper. Terry relocated the ignition to a central point just forward of the bucket seat. Good move since the first thing I did with the side mount was to break the weld. It also does away with the pivoting arm that the switch was mounted to. Last spring I launched with the hang strap inside of the pivot arm. The strap stressed the arm and I killed the motor trying to sort it out.
4. It’s BIG ! With a 66 inch prop and one piece construction the rig is too big to get inside of my store...except for the front double doors. I can't get it into the shop for hang testing. So... I'll just have to stop at an elementary school on the way to my first flight. I probably should have had Terry make it so I could remove the cage but it's not a big deal. I'll cope.
5. The 5 point seat belt looks like it came off of a Russian tank. It's 3 inch webbing with rough cast hardware. When I cinch it up I’ll be able to fly but I won't be able to reach the GPS or do any weight shift. Most likely after the first few flights I'll ditch the crotch and shoulder straps. The waist belt is very comfortable and I like the way it snug’s me into the bucket seat. The buckle is primitive but it is a good clean quick release. I'll braid a lanyard to the Q.R. to make it easy to find in an emergency.
6. I was a little concerned about the wheels but the new mags are bigger than I thought, it will be no trouble rolling over the rough stuff with these babies. Also the rims are split which will make it easy to change out a flat. The front wheel is small so...I might have to use ramps on soft surfaces … Time will tell. I do like the reverse camber of the nose wheel. It will keep it tracking if I decide to be a jerk and take my feet of the pegs… :).
7. The battery came off during transport, so I secured it with zip ties and filled the gap in the battery tray with some stiff closed cell Styrofoam. It will probably benefit from one more Zip tie but it’s not going anywhere the way it is.
Saturday, September 12, 2009
I saw God Today #350 & #351 Chatfield
It might be time to go to a maneuvers clinic or have some quality radio time with a good coach. It’s absolutely a good day to go over the machine and wing with a fine tooth comb.
Optimistically, there is an epiphany that stays with the pilot for the rest of their career, because on that day... the bag of luck is now half empty and the bag of experience is not yet full.
When I realized that my life was being supported by a glorified key
chain and some thin 1/2 inch webbing...
I thanked the Creator that I was still alive.
Then I looked for the best way,
to proceed to earth…
as directly as possible.
I'm still shaking my head trying to figure out how it happened.I attached the riser on the left side to the cheap plastic beaner that I use for the foot steering instead of connecting to the heavy stainless beaner that ties the wing to the buggy. I didn't realize my mistake until I noticed that the foot steering cable was pressing against my left side. When I saw that the rig was being supported by a glorified key chain and thin 1/2 inch webbing...I couldn't believe that I was still alive. Not only was the beaner unrated and not designed to carry a load, the loop it was attached to was loaded against the stitching. There were two places where a failure was imminent. Looking at the materials it should have failed when I loaded the wing before take-off ...and... I wish it had. It would have been more dramatic and made a bigger impression but it wouldn't have killed me. As it was a non-incident, I hope that the magnitude of the error sticks with me.
I had to get down ...right now! I was 400 feet AGL and about the correct distance to glide back to the field, so I did a slow flat turn toward the field and landed without incident.
What were the causes that lead to this huge goof ?
1. I had switched to the Eden III which does not require the extra loop of webbing to get the hangpoint right. When it is configured this way the hangpoint loops are not long enough to reach the normal keeper on the bullet bars. So...I end up attaching the beaner to a loop on the foot steering for transport.
2. I must not have had enough coffee because it is almost impossible to imagine an alert mind attaching a plastic carabiner to the riser. It is so much more difficult to thread the correct carabiner that it should have set off alarms when that slim plastic beaner tip slipped through the loop so easily. The length was about right and when I pulled on the riser to take out any slack, it pulled the hangpoint loop just as if it were correctly attached.
I thought perhaps I should move the foot steering forward on the bullet bars to get them away from the hang point straps, but I don't think I'll do that. Having the webbing behind my shoulders is cleaner and I doubt I'll ever look at the foot steering again without remembering the day I hung from a cheap 2 inch plastic carabiner.
This is the first real stupid mistake I've made in PPG and certainly the first one that endangered my life! I was deeply affected by the experience, and it was heavy on my mind for several days. I will strive to learn from this and be a more responsible pilot.
I vote for better pilot.
Tuesday, July 7, 2009
305 Meadowlake Air Park
54 degrees.... Very light breeze from SW...Glass Smooth Air
Wednesday, June 24, 2009
#300
Tuesday, March 3, 2009
Chad's High Altitude Test Flight


Posted by: "trikebuggydelta" http://us.mc01g.mail.yahoo.com/mc/compose?to=chad@TrikeBuggy.com&Subject=trikebuggydelta
Mon Mar 2, 2009 10:01 am (PST)
Thumper High Altitude TestsI went out to El Mirage and the Flying "J" Ranch this last weekend tofly the Thumper. I wanted to launch and land the machine, maybe ahundred times, and really get a feel for it. I wanted to do some highaltitude tests, to see how high it would go and what the climb rateswould be at different altitudes. I got there Friday afternoon, and pulled the Thumper out of my shedand gave the key a try. BrBrBRrBrBr, it sounded like a jackhammer as Irealized that I should have removed the positive battery lead before Ileft last time. I pulled my Toyota over near the Thumper and gave herthe breath of life. I let the Thumper run for close to an hour,letting her charge the battery up so I had a bit of reserve. The greatthing about the Briggs & Stratton motor is that this thing just runs!You simply start it, and it just loves to run. I changed the throttlea few times to 2000 and 3000 RPM, and sometimes I would run it rightup to full (at the pitch I had the IvoProp at, it topped out at around3400 RPM - should have been around 3800), then let her rest at around1200 idling. Finally, started setting up for a flight. Wrong! Once I got in theair, I could see why the Quicksilver Ultralight pilot looked so amused- it was punchy! On the ground, it was maybe 0-4 mph, seemingly niceconditions, but once in the air it was a different story. I did a fewgo-arounds and decided that it was a bit much for me and landeduneventfully. I spent the rest of the afternoon installing the FootSteering, a Reserve Parachute, more velcro for the instruments,getting some more gas and generally tightening everything andpreparing for the evening flight. At just before sunset, I launched again, and enjoyed maybe 30 touch &go's before it got so dark I was squinting to see. I was flying theDudek Synthesis 34 glider, and it worked beautifully with all thatThumper weight (220lbs) dangling from the lines. I trimmed this reflexglider full slow for this flight, and it inflated perfectly everytime(5 inflations) with the A-Assists and was still fast in the air.Looking at the risers, I saw that full slow is actually a bit slowerthan trim speed, so I set the trimmers at 0 (there's actually numberson the trimmer) to put the glider at true neutral for the morning flight.Jerry Frost and Pierre Beney arrived this evening, and we spent a goodbit of time 'Hangar Flying' around the campfire, watching the moon setalong with that planet, really spectacular!The next morning, I warmed the Thumper up for flight. With the twistof the key, she stirred to life and seemed to be content. I let herrun for a good half hour at idle, something I would never do to any ofmy two-strokes (they would coke-up and choke) while I prepared forgoing high. I used a Flytec Vario for climb rate, a Garmin GPSmap 76for better altitude, and my iPhone with the V-Cockpit app running, avery cool airplane instrument application that uses the internal GPSfor navigation. Only problem was the iPhone was so dim that is didn'tcome out in the pictures. You can see one shot of it in the photogallery on the Altitude screen, just one of the many functions thisapp has. Check out the main screen by clicking the small icon here toyour right. It's a really cool Application, and I had fun playing withit as I flew. There's even graphs of the entire flight showingaltutude, speed, climb rate, heading, but no way to save them! At about 8:30, I launched from the Flying "J" Ranch at approximately2850 feet and velcro strapped the throttle at full and sat back andrelaxed, took pictures, video, and wrote down info at each 1000 feetof altitude.
On this first flight, I did not write the time down, butyou can see the time on the pictures of the GPS, so it tookapproximately one hour to climb to 8000 feet and 1:25 to climb to12,000 feet. I was still climbing at 12000 feet, but very slowly, andI was cold - I didn't wear enough layers to keep out the chill. Plus,I had not pitched the prop for maximum efficiency, at ground level itwas only 3400, and it got slower as I climbed. The motor ran beautifully the whole time, not even a hiccup. I amamazed by the four-stroker' s incredible reliability. I could get usedto this! Trouble is, when I fly a two-stroke again, I'll be wonderingwhen it will happen.... the inevitable motor-out. This motor is madeto run, and run, and RUN! I let it idle for a few minutes after Ireached 12K, then shut it down for the long glide back down. I reallyenjoyed the views from up high, there was snow on the nearby peaksnear San Bernadino, and I could see all the way to Tehachapi to thenorth and into the LA basin through the El Cajon Pass.
Sunday, January 25, 2009
260 261 262 Thumper's maiden Voyage
The second flight was very short. The machine was so quiet that I forgot to put in plugs and put on the helmet. Right after lift off The hat went through the prop and when I heard the "wack" I was thinking broken prop or worse. I got off the throttle quick and came out of the dive with just barely enough time to flare. I bounced floated and landed. I write that one off to unfamiliar equipment and move on.
The third flight was pretty good. I stayed up maybe 30 minutes and experimented a bit with the wing. It's really hard to pull. There is plenty of power at sea level . I'll know more when I get a chance to fly in Colorado.
Friday, January 23, 2009
251 252 253 254 255 256 Salton Sea
First time to fly a performance wing Spice 24 (or there abouts)
The thumper flight was marred when I rigged the brake line thru the hangpoint rings and had a friction lock. Landed dead stick at the rocky end of the field. I had to take a wrap on the Brake line above the ring.
Tonight there was a prop burning and outdoor movies.
Tuesday, November 18, 2008
Flight 225 Simms

It's looking allot like the end of the season and in a couple of days I'm going to have my knee repaired...So...I REALLY WANTED TO FLY TODAY. Weather Underground was predicting 15 mph NE and later NW winds. Away from the foothills and out on the plains it look better with 4 to 5 mph. I was looking for places in Aurora and trying to find the old Aurora Air Park on google and map quest and decided to drive out east and take my chances. On the way home I noticed that the wind was considerably less than predicted. I decided to try Simms and sure enough there was a very light breeze 1 to 3 mph from the ENE. Perfect !
I set up and launched at 290 degrees. The wing came up wanting to turn left and it changed my intended bearing so that I was pointing right at the truck when I took off. Fortunately it was a non event because I had marched far enough out into the field so that I would be able to clear or turn once in the air. Later I realized that I had let one trimmer out an inch before taking off which explains the cockeyed launch. Some thing must have distracted me because I know to do things like that in pairs to keep things symmetrical. Anyway, I flew trimmers out as well and in this flight I really like the firmness of the wing with the trimmers out but the mixing air got me to thinking it was better to play it safe.
The air was smooth except for a few spots. I've noticed that when I get into rowdy air, I have a tendency to turn away and seek clear air instead of plowing through and getting to the other side of whatever is mixing the air. It really wasn't that bouncy but I was leery of the cut in the mountain and what could be flowing down the hill. So I turned and ran toward the home field. What I should have done was to turn 90 degrees and then when the air was good turn back to the direction I wanted.
When I was back over the field I did some low passes and apparently scared a dog who ran away from it's owners. I didn't know about it until I landed and met the family. Their little boy who was probably 13, approached me right away and asked if I'd seen their dog. I felt terrible when I met his mother and she said my PPG is what spooked him. I remembered flying right over the lady at maybe 30 feet. She was concealed by her truck until I was within 100 feet. I remember thinking, "That's not Cool", but I don't make a practice of flying over people, it was just one of those things" ...I wished it hadn't happened and apologized sincerely. She was very cool about it and said there was no way to know that the dog was going to react that way. I think she had more warning of me than I had of her and probably would have been able to secure her dog if she had thought it was necessary. At least I hope so ...
So I offered to go back up and look which she was all in favor of. The wind had shifted to the WSW and for some reason the wing hung back and came up crooked. I aborted when I started to feel it pulling.
Friday, September 19, 2008
Fight 200 at Simms

Tuesday, May 20, 2008
#145
Very nice morning flight! 145 isn't a magic number but it is the 100th trike flight and two weeks short of a year since the El Puerco Fly-in when I switched to wheels. I tried something a little different with set-up. Instead of laying the wing out in the butterfly configuration I used the thrust line to partially inflate the wing before I sat down. It pulls the risers all the way back to the cage but it's not hard to separate the "A"s and get into position. The wing comes up fast and smooth and you need to use a little brake because it wants to overshoot... but I liked the feel of it and will try it again. Several of my last take-offs have been pretty ugly and I think it's because I'm rolling out at too high a speed. This morning wasn't too bad a launch but I was at take off speed very quickly and the first little bump wanted to pop me into the sky. It would be easier to modulate speed on a smoother surface than this bumpy field but I know it will help if I can slow down...stabilize the wing and then go to full throttle.The air was smooth most of the flight. There was a little turbulence approaching Red Rocks Park which dissuaded me from trying to drop into the park and fly between the fins. I'll do it someday when I can launch at the crack of dawn and be well into the park while the air is dead still. Probably not a good place to fly after the rocks have been cooking in the sun all day. I can imagine cool air flowing down the Rockies mixing with the warm air rising from the rock.


Downtown Denver was shrouded with early morning humidity and I was even able to see Chatfield off to the South.
After going west I turned to the east of the LZ and flew over the School, Jail and Southwest Shopping Center.


















